In the picture below, I was testing my makeshift movable stencil using the wire and contact paper. This was the result. The contact paper began to be affected by the spray paint after about 12 feathers. I had curling of the finely cut areas and the feather was progressively distorted. The spray paint began to build up and drip as is evident. This pattern was sprayed onto constructed panel of pieced-together Bristol paper. The assemblage was about 4' x 7'.
Test print of peacock feather tail.
I decided to use this tail pattern after trying a few other patterns. However, I want the perpendicular feather, 90 degrees from the horizontal, to be one of the outermost feathers. Therefore I slightly rotated the fan in the final design. Below is the backside of the assembled sheets of bristol. I've drawn on my guides for printing and placement of feathers.
Paper ready for peacock feathers.
After I printed the feathers on the paper, I covered the paper with transparent contact paper (three overlapping strips, each about 18" wide). I proceeded to cut out the stencil with a tiny blade (similar to an x-acto knife). Three hours later I had removed the contact paper from all the feathers and my next step will be to transfer the stencil to the prepared background (see background with working title To Have)
Application of contact paper to printed fan of peacock feathers.
-------------------
I started a smaller scale project a few days ago. It's acrylic and ink on cold press watercolor paper. I've created stencils of the main areas of the painting in order to manipulate the image with greater exactness and line clarity.
Untitled work in progress. Acrylic and ink on cold press watercolor paper. ~18"x24".
No comments:
Post a Comment